JKU lengthy arm equipment – reworking your Jeep right into a rugged off-road machine. Think about conquering any terrain, from dusty trails to rocky peaks, with enhanced articulation and stability. This complete information dives deep into the world of JKU lengthy arm kits, exploring their parts, set up, efficiency, upkeep, and security issues. We’ll cowl every thing from the preliminary setup to potential modifications and equipment, offering you with a whole understanding of this thrilling improve.
This is not nearly including elements; it is about unlocking a complete new dimension of journey. We’ll analyze numerous manufacturers and fashions, analyzing their key options, worth ranges, and consumer evaluations that can assist you make an knowledgeable choice. Get able to take your JKU to the following stage!
Introduction to JKU Lengthy Arm Kits
A JKU lengthy arm equipment is a complete improve for Jeep Wrangler Limitless JK (JKU) fashions, enhancing their off-road capabilities. These kits change the manufacturing unit suspension parts with custom-designed lengthy arms, leading to a considerably improved journey high quality and efficiency. They’re fashionable amongst these searching for elevated articulation, floor clearance, and a extra succesful off-road automobile.Putting in a JKU lengthy arm equipment unlocks a brand new realm of off-road adventures.
The improved suspension geometry permits for higher articulation, lowering the chance of bottoming out on tough terrain. This, in flip, improves traction and stability. It additionally permits for important will increase in floor clearance, giving the automobile a a lot bigger vary of strategy, breakover, and departure angles. This interprets to confidently tackling difficult obstacles.
Kinds of JKU Lengthy Arm Kits
Varied producers supply JKU lengthy arm kits, every with its personal distinctive options and worth factors. Some kits deal with maximizing articulation, whereas others prioritize power and sturdiness. Some emphasize particular terrain efficiency, like rock crawling or desert operating. Key options typically embrace upgraded shock absorbers, {custom} management arms, and heavy-duty ball joints. These modifications are meticulously engineered to accommodate the elevated stress and calls for of off-roading.
Comparability of JKU Lengthy Arm Kits
| Model | Mannequin | Key Options | Value Vary |
|---|---|---|---|
| ARB | Customized Lengthy Arm Equipment | Excessive-strength solid parts, adjustable shock mounts, optimized geometry for superior articulation. | $6,000 – $8,000 |
| OME | Professional-Comp Lengthy Arm Equipment | Sturdy and dependable, recognized for wonderful worth, contains a wide range of choices for various budgets. | $4,500 – $6,500 |
| Fox | Manufacturing facility Lengthy Arm Equipment | Engineered with a deal with efficiency and dealing with, contains upgraded shock absorbers, and exact geometry for optimum articulation. | $5,000 – $7,500 |
| RCI | Customized Lengthy Arm Equipment | Excessive-end efficiency equipment, recognized for his or her progressive design and high-end parts. | $7,000 – $9,000 |
Word: Value ranges are approximate and might fluctuate based mostly on particular choices and options.
Elements of a JKU Lengthy Arm Equipment
Unleashing the complete potential of your Jeep Wrangler Limitless (JKU) typically requires greater than only a inventory suspension. An extended-arm equipment, a strong improve, opens doorways to improved articulation, off-road prowess, and a extra exhilarating driving expertise. Understanding the parts is essential to creating knowledgeable choices.A well-designed JKU long-arm equipment is not only a assortment of elements; it is a meticulously engineered system that considerably enhances your automobile’s capabilities.
Every element performs a selected function in reaching a extra sturdy and adaptable suspension, and cautious consideration of every aspect is important for a profitable set up and lasting efficiency.
Core Elements
The center of any long-arm equipment lies within the prolonged management arms. These arms, typically solid from high-strength metal, change the manufacturing unit parts, offering considerably elevated articulation and permitting the suspension to journey farther. The improved journey is important for navigating difficult terrain. Totally different kits make the most of numerous arm designs, resulting in variations in efficiency traits.
Management Arms
Management arms are the inspiration of the equipment. They join the axle to the body, permitting for a wider vary of suspension motion. Excessive-quality management arms are essential for dealing with the stress of maximum off-road circumstances. Solid aluminum or high-strength metal are widespread supplies, with every having its execs and cons by way of weight, sturdiness, and value.
The elevated size of the management arms permits for higher articulation and a extra aggressive strategy angle.
Steering Elements
Correct steering is important for sustaining management whereas navigating advanced trails. Lengthy-arm kits typically embrace upgraded steering parts, reminiscent of tie rods, drag hyperlinks, and steering knuckles. These parts are rigorously designed to take care of exact steering response and forestall binding beneath heavy stress. The upgraded parts assist to make sure the automobile stays secure and predictable, even in excessive off-road conditions.
Shock Absorbers
Choosing acceptable shock absorbers is paramount. Lengthy-arm kits usually require shocks with elevated journey capabilities. Selecting shocks which are each sturdy and responsive is important for a clean journey and efficient damping. Shocks are designed to regulate the suspension’s motion, absorbing affect and offering a snug journey. The shocks should be rigorously chosen to match the equipment’s specs for optimum efficiency.
Different Essential Elements
This class encompasses numerous supporting elements, together with bushings, ball joints, and mounting {hardware}. These parts are essential for clean operation and long-term sturdiness. The selection of fabric for bushings and ball joints considerably impacts the equipment’s efficiency and longevity. These elements, typically neglected, are important to a equipment’s general effectiveness.
Part Comparability Desk
| Part | Description | Materials | Estimated Value (USD) |
|---|---|---|---|
| Management Arms | Prolong axle articulation | Solid metal/Aluminum | $300-$800+ per set |
| Steering Elements | Preserve steering precision | Metal/Aluminum | $150-$400+ per set |
| Shock Absorbers | Management suspension motion | Excessive-strength metal/Aluminum | $150-$300+ per set |
| Bushings & Ball Joints | Important for clean operation | Sturdy polymer/steel | $50-$200+ per set |
Set up and Modification: Jku Lengthy Arm Equipment
Remodeling your Jeep Wrangler into an off-road beast with a long-arm equipment is a rewarding journey. This includes extra than simply bolting on new elements; it is a symphony of precision, persistence, and typically, a bit little bit of ingenuity. The method is multifaceted, requiring a eager eye for element and a willingness to delve into the intricate workings of your automobile’s suspension system.
Typical Set up Course of
The set up course of for a JKU long-arm equipment usually follows a structured sequence, designed to attenuate potential points and maximize the longevity of the brand new parts. A methodical strategy, mixed with adherence to the producer’s directions, is paramount. This course of shouldn’t be rushed, as precision is important to reaching the specified efficiency and sturdiness.
Essential Instruments and Gear
A complete toolbox is important for a clean set up. Past the same old suspects like sockets, wrenches, and screwdrivers, specialised instruments, reminiscent of a torque wrench and alignment instruments, are essential. The right instruments make sure that fasteners are tightened to the producer’s specs, guaranteeing correct performance and stopping untimely put on. Contemplate renting specialised instruments if wanted. A sturdy workbench and acceptable lifting gear are additionally important.
This ensures the automobile is safely supported in the course of the work.
Potential Modifications Alongside Equipment Set up
Putting in a long-arm equipment presents alternatives for additional modifications. Upgrading the shocks, steering parts, or including a winch can improve the equipment’s efficiency. Contemplate these modifications to optimize the equipment’s capabilities, tailor-made to your particular off-road objectives. This strategy means that you can fine-tune the suspension system and driving expertise.
Set up Steps
- Disassembly and Preparation: Fastidiously take away the outdated parts and put together the mounting factors. This contains cleansing, checking for injury, and verifying the compatibility of all elements. This preliminary step ensures the set up is correct and addresses any underlying points.
- Arm Set up: Set up the lengthy arms in accordance with the producer’s directions, paying shut consideration to alignment and torque specs. Guarantee all parts are securely related and correctly aligned to stop points throughout operation.
- Shock Mount and Bushings Set up: Fastidiously set up the brand new shock mounts and bushings, guaranteeing correct match and safe attachment. This step includes utilizing the right instruments and guaranteeing the bushings are correctly seated.
- Management Arm Set up: Set up the management arms, following the producer’s directions meticulously. Verify the right placement of all parts and the right connection of all parts.
- Steering and Braking System Inspection: After putting in the long-arm equipment, rigorously examine the steering and braking programs. Guarantee there aren’t any interference points or improper connections.
- Testing and Changes: Completely check the automobile’s suspension and steering efficiency. Make any needed changes to make sure the equipment capabilities optimally. This significant step ensures that the brand new system works as anticipated.
Efficiency and Capabilities
Unleashing the true potential of your Jeep Wrangler JKU with a long-arm suspension equipment is like upgrading your off-road chariot to a high-performance machine. This transformation is not simply beauty; it is a important enchancment in capabilities that really adjustments the sport. You may expertise a newfound confidence and mastery over the paths, pushing the boundaries of what you thought potential.An extended-arm equipment considerably enhances the Jeep’s articulation, permitting for a higher vary of motion.
This interprets to a smoother, extra managed journey over tough terrain, and extra importantly, a capability to deal with obstacles you beforehand could not even ponder. This enhanced articulation is the important thing to navigating difficult off-road environments with higher ease and stability.
Enhanced Off-Street Efficiency
Lengthy-arm kits are meticulously engineered to optimize a Jeep’s off-road prowess. They do that by growing the Jeep’s capacity to flex and soak up shocks, resulting in a extra managed and secure journey on difficult terrain. This enhancement is essential for conquering steep inclines, rocky ascents, and treacherous descents.
Improved Articulation
The first advantage of a long-arm equipment is its important affect on articulation. Elevated articulation means the suspension can transfer by means of a wider vary of angles. This enables the tires to take care of contact with the bottom even on uneven surfaces, enhancing traction and stability. A well-articulated suspension system reduces the chance of bottoming out and gives a smoother journey.
Floor Clearance and Stability
A vital aspect of off-road functionality is floor clearance. Lengthy-arm kits typically enhance floor clearance, enabling you to traverse obstacles like rocks, logs, and deep ruts with confidence. This enhanced clearance, mixed with the improved articulation, gives a extra secure and managed driving expertise, essential for tackling difficult off-road obstacles.
Comparability of Totally different Lengthy-Arm Kits, Jku lengthy arm equipment
Totally different long-arm kits cater to various wants and budgets. Some prioritize excessive articulation for technical rock crawling, whereas others deal with a stability of efficiency and ease of use for extra common off-roading. The selection is determined by your particular off-roading fashion and the kinds of terrains you incessantly encounter. For instance, a equipment designed for rock crawling will usually have a extra aggressive geometry, whereas a equipment designed for common off-road use will doubtless supply a extra balanced strategy.
Efficiency on Various Terrains
The efficiency of a long-arm equipment can fluctuate vastly relying on the terrain. A equipment designed for rocky trails won’t carry out as properly on unfastened sand, and vice versa. Contemplate the kind of terrain you incessantly drive on when deciding on a equipment. The desk under gives a common overview of how completely different long-arm kits can carry out on numerous terrains:
| Terrain | Efficiency Benefits of a Lengthy-Arm Equipment | Potential Challenges | Issues |
|---|---|---|---|
| Rocky Trails | Enhanced articulation permits for exact maneuvering over obstacles, and elevated floor clearance prevents bottoming out. | Elevated suspension journey could make the journey barely rougher on clean surfaces. | Select a equipment with aggressive geometry and excessive floor clearance. |
| Muddy Trails | Elevated floor clearance and articulation permit for extra assured passage by means of deep mud and ruts. | Elevated suspension journey can doubtlessly result in a slower acceleration by means of muddy terrain. | Contemplate a equipment with a stability of articulation and suspension journey. |
| Unfastened Sand | Improved floor clearance and articulation scale back the chance of getting caught in unfastened sand. | The longer suspension arms can doubtlessly make the Jeep extra prone to side-to-side motion. | Select a equipment that provides wonderful floor clearance and a extra managed suspension system. |
| Forest Trails | Improved articulation and floor clearance will be helpful in navigating by means of wooded areas and obstacles. | The elevated weight of the upgraded suspension can barely scale back the Jeep’s gas effectivity. | Contemplate a stability between efficiency and practicality. |
Upkeep and Troubleshooting
Holding your JKU long-arm equipment in tip-top form is essential for its longevity and efficiency. Correct upkeep not solely extends the lifetime of your upgraded system but additionally prevents expensive repairs down the street. A well-maintained equipment ensures a clean and pleasant off-road expertise, enabling you to deal with any terrain with confidence. Understanding how you can troubleshoot potential points will prevent time and frustration, permitting you to get again on the path rapidly.Sustaining a long-arm equipment includes a mix of routine checks and specialised procedures.
Understanding the potential points that may come up is simply as essential as figuring out the options. This part will element the important upkeep procedures, widespread issues, and efficient troubleshooting methods to maintain your JKU long-arm equipment operating easily.
Important Upkeep Procedures
Common upkeep is essential to stopping potential issues. This contains inspecting all parts, checking fluid ranges, and lubricating transferring elements. Thorough inspections, particularly after important off-road adventures, will help establish points earlier than they escalate. Visible checks for put on and tear on bushings, hyperlinks, and mounts are important. Common greasing of pivot factors and joints is important for clean operation and prolonged lifespan.
Potential Points and Issues
A number of points may come up after set up, starting from minor changes to extra important issues. Unfastened or broken parts may cause vibrations or surprising noises. Fluid leaks from shock absorbers or different parts can result in efficiency points and injury. Improper alignment may trigger points and doubtlessly injury different elements of the suspension. An intensive understanding of the precise points that may happen is important for prevention and well timed decision.
Troubleshooting Frequent Points
A scientific strategy to troubleshooting is important. Begin with visible inspections, listening for uncommon noises, and checking for leaks. Seek advice from the producer’s directions for particular tips. Documenting the steps taken throughout troubleshooting is a useful observe for future reference and analysis.
Troubleshooting Desk
| Concern | Trigger | Answer | Prevention |
|---|---|---|---|
| Extreme Noise/Vibration | Unfastened or broken parts, misaligned elements, worn bushings. | Tighten all parts, examine for injury, alter alignment as wanted, change worn bushings. | Usually examine parts for indicators of damage, use correct torque specs when tightening fasteners. |
| Fluid Leaks | Broken seals, worn hoses, unfastened connections. | Determine and restore the leak supply, change broken seals or hoses, guarantee all connections are safe. | Common fluid checks, inspecting seals and hoses for put on, correct dealing with of parts throughout upkeep. |
| Poor Efficiency/Diminished Trip High quality | Improper alignment, worn shock absorbers, inadequate lubrication. | Regulate alignment, change worn shock absorbers, re-lubricate joints and pivot factors, test for correct fluid ranges. | Common alignment checks, scheduled upkeep for shock absorbers, constant lubrication. |
| Surprising Binding or Sticking | Filth and particles in transferring elements, inadequate lubrication, broken parts. | Completely clear parts, re-lubricate affected areas, change broken parts. | Common cleansing of parts, diligent lubrication, avoidance of maximum circumstances the place important particles accumulation is anticipated. |
Security Issues
Unleashing the off-road potential of your JKU with a long-arm equipment is exhilarating, however accountable preparation is paramount. Security is not an afterthought; it is a basic side of each modification, particularly when venturing into difficult terrain. Prioritizing security throughout set up and operation ensures a rewarding and worry-free expertise.An extended-arm equipment, whereas enhancing functionality, additionally introduces new dynamics to your driving.
Understanding the potential dangers and implementing preventative measures is essential for sustaining a protected and managed driving expertise. Correct procedures and a focus to element are key.
Set up Precautions
Thorough preparation is important earlier than enterprise any set up. This contains guaranteeing a transparent workspace, gathering all needed instruments and parts, and familiarizing your self with the equipment’s particular directions. Mishaps throughout set up can result in injury to the automobile and private damage.
- At all times disconnect the battery terminals earlier than beginning any set up to stop unintentional electrical shocks.
- Use acceptable lifting gear and safe the automobile correctly to stop motion throughout set up.
- Comply with the producer’s directions meticulously for all procedures, particularly these associated to suspension parts and linkages.
- Guarantee all fasteners are accurately tightened to the producer’s specs to take care of structural integrity.
Alignment and Adjustment Procedures
Exact alignment and changes are very important for optimum efficiency and security. Improper changes can result in dealing with points, lowered management, and potential accidents.
- Make use of skilled alignment instruments and strategies for correct changes.
- Search skilled help for advanced or important changes if wanted. Skilled experience is invaluable in these eventualities.
- Usually test and alter the suspension parts and linkages to take care of optimum efficiency and security.
Potential Dangers and Hazards
Understanding the potential dangers related to a JKU long-arm equipment is important for knowledgeable decision-making. Excessive-speed off-roading, whereas thrilling, comes with inherent dangers.
- Excessive terrain can result in surprising obstacles or hazards, demanding fixed vigilance and preparedness.
- Elevated suspension journey can exacerbate dangers related to rollovers or different automobile instability points, requiring cautious driving strategies.
- Correct tire choice and stress are important to take care of optimum grip and management.
- Guarantee your automobile’s security programs are purposeful, together with brakes and steering.
Secure Driving Practices on Tough Terrain
Driving on tough terrain with a long-arm equipment requires a distinct strategy than normal driving. Warning and calculated maneuvers are key.
- Preserve a protected following distance to permit for sudden obstacles or adjustments in terrain.
- Drive at acceptable speeds for the terrain, prioritizing management and stability over pace.
- Pay attention to your environment and anticipate potential hazards, reminiscent of rocks, roots, or different obstacles.
- Make the most of the automobile’s capabilities safely and inside its design limits.
Consumer Opinions and Comparisons
Unveiling the world of JKU long-arm kits by means of the eyes of those that’ve braved the paths and tackled the terrain. Consumer evaluations supply invaluable insights, offering a real-world perspective on efficiency, reliability, and general worth. This exploration delves into the varied experiences, highlighting the strengths and weaknesses of varied manufacturers and fashions.Consumer suggestions, when analyzed, reveals essential patterns and customary themes.
Understanding these tendencies permits potential consumers to make knowledgeable choices, deciding on the equipment that greatest aligns with their wants and expectations. This part compares and contrasts completely different long-arm kits, providing a complete overview for these searching for to improve their Jeep.
Efficiency Metrics
Consumer evaluations persistently spotlight the improved efficiency of JKU long-arm kits. Improved articulation, enhanced floor clearance, and elevated towing capability are incessantly cited as key advantages. The flexibility to overcome difficult terrain is usually described in enthusiastic phrases, showcasing the tangible affect of those modifications. A important side is the dealing with and responsiveness of the automobile, which will be considerably affected by the precise parts and design decisions inside the equipment.
That is additional supported by particular experiences associated to numerous terrain sorts.
Function Comparability
Totally different long-arm kits supply a wide range of options. Some kits prioritize heavy-duty parts for superior power, whereas others emphasize lighter, extra agile designs. The selection of parts, together with the kind of arms, bushings, and steering parts, considerably influences the general efficiency and functionality of the equipment. This detailed look into particular parts and their affect will help within the decision-making course of.
Reliability and Sturdiness
The reliability and sturdiness of long-arm kits are paramount. Lengthy-term customers present insights into the longevity of various parts and the potential for points or upkeep necessities. Understanding potential put on and tear and related upkeep prices is essential for long-term possession. These components are important issues for consumers planning a considerable funding.
Consumer Expertise Abstract
| Model | Execs | Cons | Total Ranking |
|---|---|---|---|
| Model A | Distinctive articulation, sturdy development, well-designed parts, responsive dealing with | Barely greater worth level, some reported minor meeting points | 4.5/5 |
| Model B | Wonderful worth for worth, available elements, sturdy development, wonderful dealing with on numerous terrains | Minor suspension noise in sure circumstances, some compatibility points with aftermarket elements | 4.2/5 |
| Model C | Superior options, high-end parts, spectacular off-road efficiency, wonderful articulation | Advanced set up course of, restricted availability of sure elements | 4.7/5 |
| Model D | Light-weight design, enhanced agility, good worth, superior dealing with in on a regular basis driving | Restricted articulation on very difficult terrain, may require extra modifications for excessive circumstances | 4.0/5 |
This desk summarizes consumer experiences throughout completely different manufacturers. Particular examples of constructive and damaging suggestions are important for an intensive understanding. Do not forget that particular person experiences could fluctuate. At all times analysis and think about your particular wants and driving fashion earlier than making a purchase order.
Visible Illustration of a JKU with a Lengthy Arm Equipment
The Jeep Wrangler JKU, with its iconic boxy design, turns into a distinct beast when geared up with an extended arm equipment. These kits aren’t nearly including suspension; they basically alter the automobile’s visible presence, giving it a extra aggressive and succesful stance. This transformation is obvious in each angle, and the visible adjustments mirror the elevated articulation and floor clearance.The important thing visible variations between a inventory JKU and one with an extended arm equipment lie within the suspension geometry, wheel properly clearance, and general stance.
An extended arm equipment redefines the Jeep’s capabilities and look, providing a visible illustration of its upgraded off-road potential.
Suspension Geometry and Physique Peak
Essentially the most noticeable change is the numerous enhance in floor clearance and the ensuing altered journey peak. The lengthy arms themselves, typically extending from the body to the axle, create a extra pronounced “lifted” look. This elevate, usually starting from 2-6 inches, gives a commanding presence and a higher capacity to deal with difficult terrain. A delicate however essential visible clue is the repositioning of the automobile’s management arms, seen beneath the physique, and the altered angles of the suspension parts.
Wheel Properly Clearance and Tire Dimension
The elevated floor clearance typically necessitates bigger tires, which can have a extra pronounced impact on the visible side of the automobile. Wider and taller tires, typically even with bigger wheel diameters, fill the wheel wells extra prominently, additional emphasizing the automobile’s off-road functionality. This typically results in a extra aggressive and rugged aesthetic. The elevated clearance additionally permits for bigger tires and wheels with out rubbing towards the physique, a major visible enchancment.
Total Stance and Look
An extended-arm equipment basically adjustments the Jeep’s stance. The automobile’s heart of gravity is usually raised, leading to a extra pronounced strategy angle and departure angle, making a wider observe, which boosts stability and confidence on difficult terrain. This visible change is usually accompanied by a extra aggressive entrance bumper and winch, additional reinforcing the automobile’s off-road character. The looks transitions from a inventory Jeep Wrangler to a extra succesful and visually distinctive off-road machine.
Visible modifications like aftermarket bumpers, rock sliders, and winches additional contribute to this picture.
Visible Enhancements and Modifications
Visible modifications are sometimes tailor-made to the proprietor’s preferences and supposed use.
A typical visible enhancement is the addition of aftermarket bumpers and rock sliders. These parts not solely present safety but additionally add to the Jeep’s rugged aesthetic. Winches, for instance, will be built-in into the entrance bumper, additional enhancing the visible profile of the automobile. Typically, a set of high-clearance fenders or fender flares will accompany the lengthy arm equipment, including additional safety to the automobile’s wheel wells and enhancing the visible attraction.
The selection of wheels and tires additionally considerably impacts the automobile’s visible look, from a easy wheel improve to a custom-built set-up.
Potential Modifications and Equipment
Taking your JKU long-arm equipment to the following stage includes strategic additions that improve its capabilities and personalize its look. Past the core parts, a wealth of equipment can be found, every tailor-made to particular wants and preferences. These equipment considerably affect the general efficiency, utility, and aesthetic attraction of your Jeep.
Bumpers
Strong bumpers are important for off-roading, offering added safety and mounting factors for equipment like winches. The market affords a variety of choices, starting from delicate metal to heavy-duty aluminum. Totally different kinds cater to numerous aesthetics, from aggressive rock sliders to modern, fashionable designs. Contemplate the terrain you will be tackling when selecting a bumper, guaranteeing it is able to withstanding the impacts of rugged adventures.
Winches
Winches are indispensable for extracting your Jeep from tough conditions. Selecting the best winch is determined by the anticipated challenges. Increased-capacity winches are extra highly effective but additionally include the next price ticket. Issue within the weight of your automobile and the anticipated pulling drive when deciding on a winch. A strong winch is usually a game-changer for tackling difficult terrain.
Different Equipment
Past bumpers and winches, a myriad of equipment improve your JKU’s performance and look. Roof racks supply extra storage and carrying capability. Skid plates shield weak undercarriage parts from rocks and particles. Lighting upgrades illuminate your path in low-light circumstances. These equipment could make a considerable distinction in your off-road expertise.
Compatibility and Value Ranges
Compatibility of equipment with particular long-arm kits is essential. Producers typically present compatibility charts to information your choice. Make sure the chosen equipment are appropriate on your particular long-arm equipment and different parts. Contemplate your price range when deciding on equipment. The value vary varies considerably relying on the sort, model, and options of the product.
| Accent | Description | Compatibility with Lengthy Arm Kits | Value Vary |
|---|---|---|---|
| Heavy-Responsibility Metal Bumper | Offers most safety and mounting factors. | Typically appropriate with most long-arm kits, however test producer specs. | $500-$1500+ |
| Aluminum Bumper | Light-weight, however nonetheless gives substantial safety. | Typically appropriate with most long-arm kits, however test producer specs. | $600-$1800+ |
| Electrical Winch (10,000 lbs capability) | Highly effective winch for excessive restoration conditions. | Compatibility is determined by the winch’s mounting factors and the long-arm equipment’s design. | $1000-$3000+ |
| Roof Rack | Offers additional space for storing for gear. | Compatibility is determined by the roof rack’s design and the long-arm equipment’s affect on roof construction. | $200-$1000+ |
| Skid Plates | Protects undercarriage parts from injury. | Compatibility is determined by the precise skid plates and the long-arm equipment’s undercarriage modifications. | $100-$500+ |
